Category: Troubleshooting

Dishwasher Repair

You don’t want to clean dirty plates and bowls in the sink. That is what a dishwasher is for. This home appliance is one of the most popular and the most convenient in the USA. You’ll see a dishwasher in almost every single kitchen. Famous brands include Whirlpool, GE, Sears, Electrolux and LG. There are several styles of dishwashers to choose from for a house but all will need repair from professionals like Instant Livonia Appliance Repair in Michigan.

A name brand dishwasher will last close to 10 years or longer. “The lifespan of an appliance usually depends on how well the homeowner cares for it and if the appliance is used the right way,” says a professional, an expert in appliance repair. The occurrence is for a dishwasher to begin breaking down about 8-10 years after its installation. For a lot of the problems, a homeowner can repair on their own. For the rest, they will need the help of a professional appliance repair company.

Our website has written a list of some of the issues that most often occur on worn-down household dishwashers. For any questions regarding our list or for repair tips, please fill out our online form or speak with an appliance repair company:

DISHWASHER REPAIR TIPS

The below list features some of the most typical issues that occur on residential dishwashers. Continue reading:

STRANGE NOISES

In general, a dishwasher is a loud appliance because of the amount of water that runs through it during its washing cycle. That said, if you begin to hear rattling noises or grinding coming from the appliance, the odds are there’s something probably wrong with the machine. We recommend inspecting the pump motor as well as the bearings and the motor brushing. The pump motor is usually the cause of a rattle while the other parts could be worn out and grinding.

LEAKS

As mentioned previously, several gallons of water run through a dishwasher in its operating cycle. The water is needed to remove food and grease from plates, bowls, glasses and silverware and to wash off soap and detergent. Leaks are a serious issue that need immediate attention. A typical cause is a worn door closure or a worn pump on the appliance. However, be sure to look at the inlet valve too. To replace these parts, it is best to enlist the assistance of a professional appliance repair company.

DOESN’T START

If a dishwasher, or another appliance, doesn’t start or turn on, check that it’s plugged in. It’s electronic controls, motor relay and thermal fuses.

IS NOT WASHING WELL

If dishes are not clean once a wash cycle is over, there might be a problem with the dishwasher. You’ll need to troubleshoot several parts of the dishwasher in order to determine the cause of this problem. The parts to troubleshoot are the spray arms and the housing gaskets. The filters and the water delivery tubes will also need to be inspected for signs of clogs or buildup preventing the flow of water in the appliance.

WON’T DRAIN OR FILL

A dishwasher should fill with water during the start of the cycle and the rinsing and cleaning phases of the cycle. After that, it should drain all of the water at the end of the cycle and prior to drying. In the event the dishwasher isn’t filling with water, we recommend troubleshooting the door switch and the float switch on the dishwasher plus the water inlet valve. If the dishwasher is not draining, the first part to troubleshoot is the drain pump motor on the machine. The drain hose or timer could also be the cause of the problem.

DETERGENT NOT DISPENSING

A dishwasher will dispense detergent in the begging of the washing cycle. The detergent is needed to break down the food and grease on the dirty dishes. The bi-metal release on the appliance is the likely reason for this issue. You need to decide if it can be repaired or if the appliance part will need to be replaced. Replacement manufacturer appliance parts can be acquired from online distributors or installed by neighborhood repairmen. The secondary dishwasher parts to inspect for this problem are the wax motor and the timer on the appliance.

HIRING A PROFESSIONAL

If one of the problems in our list occurs and you don’t feel comfortable trying DIY dishwasher repair, it is best to hire a professional appliance repair company right away. It would be a shame to do further harm to an expensive kitchen appliance from DIY mistakes. here’s a few local services our blog recommends:

Refrigerator Repair

refrigerator repair

There is a refrigerator in every home. You need a refrigerator to keep food and beverages cold and fresh. You do not want to have a refrigerator that does not work. Find refrigerator repair tips from Premiere Appliance Repair in Chula Vista, California.

A standard refrigerator is a lot more than just a home appliance made for convenience, it’s important for the storage of several foods and beverages so that they will not spoil. There are a variety of popular models and brands to choose from that you’re going to be able to find one that suits your home, budget and lifestyle. It is something that you need, but you will also want one that looks really good in your kitchen too.

The refrigerator brands our website recommends for most houses are the following: Amana, Frigidaire, Sub-Zero, Samsung, Whirlpool, Wolf and Kenmore. You can go to the websites for each brand to learn more about the exact product. Plus, travel to a local appliance retailer and ask the staff or contact an appliance repair specialist around your neighborhood for an recommendation on what brand and model is the right long-term investment.

Same as any other appliance, regardless of just how useful it is, they all have an average lifespan. “For a refrigerator, the expected lifespan is about 10-12 years,” according to Service Owner, owner of a professional service for appliance repair in Town. “This is an guess because better brands are will be able to last much longer than a lot of the others,” Owner says. You need to understand as much as possible about the model you buy to be sure you care for it properly and help increase its lifetime. The manual is going to be the best resource to do this. You can discover a lot of major appliance manuals on the internet.

REFRIGERATOR REPAIR TROUBLESHOOTING

Below we have published a list of issues, tips, and other recommendations that should help you care for your home’s refrigerator so that it lasts as long as possible.

NOT RUNNING OR TURNING ON

In the event this occurs, you may want to inspect the compressor overload relay and the thermostat on the refrigerator. You might want to call on the assistance of a professional for these kinds of issues. Before you get to these complicated diagnostics, you should check to confirm that the fridge is plugged in, that the power cord is not damaged, and the circuit breaker for the kitchen has not been tripped.

STRANGE, LOUD NOISES

Every refrigerator makes some type of noise, but there’s a distinct difference from these sounds and the loud noises that will catch your attention. In the event these loud sounds arise, it is an immediate sign that there is a part somewhere in the appliance that is wearing out. The evaporator fan motor and the condenser fan motor are common sources of loud sounds and they should be inspected for damage and wear.

WON’T MAKE ICE

A lot of the high-tech models come made with ice makers, which is a convenient feature to have. Although it might not affect how the refrigerator works, it is something that will need to be corrected when it is not working. You’ll need to examine the water fill tubes, the water inlet valve, and the ice maker. Whichever of the three it is, it is usually easy to get any replacement part you need to purchase from the manufacturer’s online store.

REFRIGERATOR LEAKING WATER

There are a couple of different parts that often cause a refrigerator to leak water; the water inlet valve and the door latch and seal. The water inlet valve is a valve that is connected to the water line that’s located behind the back of the refrigerator. The door seal and latch are two parts that will be easier to inspect, and it should be pretty easy to find replacement parts for purchase.

FREEZER GETTING TOO COLD

It may seem impossible, but that’s far from the truth. A freezer should run at around 0 degrees Fahrenheit and refrigerators operate around 40 degrees Fahrenheit. If the freezer is too cold it might lead to the waste of food that is in the freezer. Because of this, you are going to want to fix the issue quickly so that you aren’t throwing out a bunch of food. If this happens to your freezer you might want to be sure that the freezer is set to the right temperature. Then you are going to need to inspect the defrost timer and the thermostat.

REFRIGERATOR GETTING TOO WARM

Just like when it is too cold, if it’s too warm it is going to spoil the food and drinks inside the refrigerator as well. This is one of those problems that can end up costing you money in wasted food. This issue can be caused by the air inlet damper, evaporator fan, defrost thermostat, defrost heater, or the defrost timer. It could be difficult to identify which of these appliance parts is causing the issue if you are not trained to understand what you are searching for. Calling in a professional is going to be the best course of action in this case.

There are a lot of working parts within a standard refrigerator including the refrigerator, freezer, and the ice maker in some cases. It’s a complicated system that’s necessary in order to create cold temperatures inside of a refrigerator or freezer. It’s an important residential appliance that could be hard to repair if you have no any experience in doing so. The manufacturer’s manual is going to be your best resource for learning to troubleshoot any issues that may occur. It is OK if you do not feel confident doing these repairs, that is why there are professionals near you in the first place to contact. Give these companies a call: